1, Goldfinger tape should be stored in the warehouse, to avoid the sun and rain; no organic solvent and acid base oil touch, adhere to clean dry, away from the device found outside 1m, temperature between -15 ℃ ~ 40 ℃.
　　2, the conveyor roller Jane minimum diameter pulley diameter and belt conveyors should be consistent with the relevant provisions.
　　3, not to make different varieties, different specifications, intensity, layers of polyimide tape fabric connection (with the group) to use together.
　　4, anti-static tape type, size according to the needs and specific conditions of use, reasonable selection.
　　5, when loading and unloading conveyor is best to use a crane, and a beam with a smooth lift rigging to prevent damage to the belt edges, not outrageous handling, causing the unwinding rejection sets.
　　6, the best use of thermal curing conveyor belt joint glued to improve reliability, adhere to a higher useful strength.
　　7, Goldfinger tape should be placed in a roll, not folded, too long storage time should be turned over once every quarter.
　　8, cleanliness is essential for good operation of Goldfinger tape, foreign substances may affect tape eccentric tension difference, or even break.
　　9, when the conveyor is equipped with baffles and equipment cleaning means, should be avoided polyimide tape wear.
　　10. Do not allow hunting polyimide tape or crawling, to keep drag roll, vertical roll sensitive, the tension should be moderate.
　　11, use of polyimide tape was found early when there is damage to the appearance, should be to find the cause, repair, to avoid adverse consequences.