US Pictet sided adhesive properties of water: water glue (ie, acrylic ester pressure sensitive adhesive emulsion) acrylic acid ester monomer is a surface-active agent is emulsified in water as a medium by emulsion polymerization under. Compared with the solvent-based adhesive, emulsion polymerization product is obtained. Compared with the solvent-based adhesive, emulsion type product clearly has a low cost, safe operation, do not pollute the environment and so on. Double-sided adhesive tape is coated with water-based glue water on both sides of the substrate, then covered with peel easily from the type material made of.

1, acrylic ester polymer binder
2, high degree of non-woven dialysis
3, double shower PE-coated silicone release paper

Substrate: Cotton
Glue: Acrylic
Thickness: 80μm
Length: Any
Resistance Temperature: 60 ℃ -80 ℃

Patek double-sided adhesive US water use: injection temperature fixing temperature double-sided tape double-sided tape plastic factory automatic line for injection plastic parts with injection fixing, adhesive strength, when the fuel injection will not blow off the workpiece. Temperature up to 80 degrees, peel off without residue. Affordable, reusable

US Pictet sided water gel product storage: 1, product packaging stored in a cool dry place, away from sunlight and heat frozen
2, preservation of the environment to avoid placing excessive heat at 20 ℃ -30 ℃
3, was sticky surface is clean and dry and free of grease goods or other contaminants
                                    4, the best use of: Factory to six months more than a year of double-sided adhesive, please small quantities of water in the product trials